Pump Accessories

Skip to results list

Active filters:

21 items
Column grid
Column grid

Filter

Active filters:

Shop breast pump accessories at MamaLife — flanges, valves, tubing, backflow protectors, cups, shields, collectors, pump bags and cleaning wipes for Spectra, Elvie, Medela, Momcozy, Farlin and Haakaa. The parts are the most overlooked bit of pumping, and the most important: a tired valve can cut your suction in half long before the motor fails. Keep a spare set in the drawer and your pump works like new for years.

When to replace each part

Part Replace every Signs it is worn
Duckbill valves / membranes 2–8 weeks (frequent pumping); 1–3 months (light use) Weaker suction, slit stays open, stretched or torn
Backflow protectors Every 3–6 months, or at once if wet Moisture behind the membrane, tears, cloudiness
Tubing Every 3–6 months, or at once if wet Condensation or milk inside, cracks, mould
Flanges / breast shields Every 6–12 months, or when damaged Cracks, warping, cloudiness, poor fit
Silicone flange inserts Every 1–3 months Loss of elasticity, stickiness

These are general manufacturer guidelines — your pump's own manual comes first. The CDC's rule is simpler: replace any part that touches breast milk as soon as it looks worn or damaged. A study in the Journal of Human Lactation found suction can fall by up to 50% from worn parts, long before the motor fails.

Shop parts by pump brand

Spectra: silicone valve sets, a valve set for the hands-free kit, backflow protector set, silicone tubing, wide breast shield set and wide accessory kit, plus the silicone cover and the milk collection cup sealing for the hands-free cup. See our Spectra breast pumps for the pumps these fit. Elvie: Stride cups, Stride breast shields (28 mm), pump breast shields (28 mm) and breast pump seals — check whether you own a Stride or a Wearable Smart before ordering, because the parts are not interchangeable. See Elvie breast pumps. Medela: valves and membranes for the retail kit. Momcozy: a 21 mm flange insert for the S9 Pro and S12 Pro. Always check your pump model before ordering a part — a valve that fits a Spectra S1 will not fit an Elvie Stride.

Flange fit: the part that decides comfort

Flange fit decides whether pumping is comfortable and effective. Measure your nipple diameter and add a few millimetres — the shield should fit without rubbing. Spectra wide shields come in 24, 28 and 32 mm; Medela PersonalFit Flex shields run from 18 to 36 mm; Momcozy flange inserts come in 17, 19 and 21 mm (ours is the 21 mm insert for the S9 Pro and S12 Pro). Farlin's ultra-thin shield is 24 mm. If your nipple size has changed since birth — which is common — re-measure before you blame the pump. A wrong size hurts, and it empties less milk.

Collectors, bags and cleaning

Not everything here is a spare part. The Momcozy breast milk collector and the reusable colostrum collector catch letdown and early milk without a pump, and the Haakaa Ladybug does the same job passively in your bra. The Momcozy pump bag carries a wearable pump and its parts, so everything stays together in your work bag. Natural breast pump wipes clean parts quickly when you are out and cannot wash them properly. The Farlin nipple corrector gives gentle support for flat or inverted nipples. For the milk you collect, see Feeding for storage bags and bottles.

How to tell your parts are worn

Check the valves first — they are the most common cause of weak suction. Hold a duckbill valve up to the light: if the slit stays open, the tip is stretched or split, or the silicone feels stiff or sticky, replace it. Check membranes the same way: a good one lies flat; a stretched or torn one does not. Look inside the tubing for condensation or milk — if you see any, replace the tubing and check the backflow protector behind it. Look at flanges for cracks, chips and cloudiness. If suction is weaker on one side only, swap the parts between sides: if the problem moves with the part, you have found it.

Parts for every pump we sell

Every pump in the store has its parts here: Spectra, Momcozy, Medela, Elvie and Haakaa, plus the full Breast Pumps collection and the Wearable Breast Pumps collection. If you are buying a first pump, add a spare valve set to the order — it is the cheapest insurance against a bad pumping day. And if you pump with a wearable, keep a spare set of cups or seals too: wearable parts are small, and a lost seal at work is a session lost.

Frequently asked questions

How often should I replace my breast pump valves?
Every 2–8 weeks if you pump four or more times a day, or every 1–3 months for lighter use. Replace sooner if the slit stays open, the tip is stretched or split, or suction drops.

Why has my pump lost suction?
Check the valves and membranes first — they are the most common cause, and a study found suction can fall by up to 50% from worn parts. Then check the backflow protector and the tubing for moisture.

Do Spectra parts fit other brands?
No. Parts are brand- and model-specific — a Spectra valve will not fit an Elvie or a Medela. Check your pump model on the product page before ordering.

What flange size do I need?
Measure your nipple diameter and add a few millimetres. Spectra wide shields come in 24, 28 and 32 mm; Medela PersonalFit Flex runs 18–36 mm; Momcozy inserts come in 17, 19 and 21 mm.

Can I wash and reuse valves and membranes?
Yes, wash them after every use — but washing does not restore a stretched valve. Replace them on schedule, and keep a spare set so a worn part never costs you a session.